We have these 35mm / 1500W Direct Drive Hub Motors customized with 2.5mm2 phase wires to provide superior performance in all riding conditions. The stator is a “V2 design, which consists of a cast aluminum stator core, and 0.35mm thick silicone steel laminations. This motor is perfectly suited to pair with our 6FET and 12FET Sine Wave controllers, and make it a blast to ride.
Winding Options = 4T with phase resistance of about 0.110 Ohms, and a Kv of about 12 RPM per volt, or 6T with phase resistance of about 0.190 Ohms, and a KV of about 7.5 RPM per volt
Phase Wires: 2.5mm2 with Halls & KTY83/110 Temp Sensor.
Connectors: 4mm HXT Connectors on the Phases, and JST-SM 6-PIN connectors on the sensors.
Spoke Holes: 3.4mm diameter, which is ideal for 12G (2.6mm) Spokes. 36H only.
Drop-Out: 135mm between the axle flats. Overall axle Length is 220mm, M14 Axle Size
*Motor is “non-branded”